Welcome to the To Etudes de Ballet wireless network. If your wireless adapter does not detect our wireless hotspot, you must enter the wireless network name and any required wireless security settings for the network. Our network is called "etudes" (minus the quotes).

Once you enter the wireless settings for a network, your adapter stores this information, and you can reconnect to this network any time it is within range without reconfiguring the wireless security settings.

The procedure for joining an available wireless network varies depending on your version of Microsoft Windows®.

1. Start the Broadband Network Utility.
2. On the Tools menu, click Adapter Settings.
3. In the Wireless Adapter drop-down list, make sure that a wireless adapter is selected.
4. Click Available Networks.
5. From the list of available networks, select the network you want to join. If the network that you want to join does not appear, click Advanced and then click Configure to enter the wireless network settings. Leave the index key set to the default (0 or 1) unless you know that the base station, gateway, or router to which you are connecting has been customized to use a different key.
6. Click Connect.

Tip You can also begin this procedure from within Windows XP. For more information, see Windows Help.

1. Start the Broadband Network Utility.
2. On the Tools menu, click Adapter Settings.
3. In the Wireless Adapter drop-down list, make sure that a Microsoft wireless adapter is selected.
4. From the list of available networks, select the network you want to join. If the network that you want to join does not appear, click Refresh. If it still does not appear, click Cancel, and then click Configure to enter the wireless network settings.
5. If the network that you want to join uses wireless security, you will be prompted to type the Wired Equivalent Privacy (WEP) key in the Security Key box, and retype it in the Confirm Security Key box.
6. Click Connect.